Description

CONNEX Mini is used mostly when the user needs the ability to use the wireless link on a variety of platforms. mini-connex-photo-29 From heavy lifter Drone platforms to handheld gimbals and even helmet cams, instead of using big and cumbersome wireless solutions the CONNEX Mini is providing a small-sized, small weight solution that the camera operator can use in every scenario for Air to Ground and Ground to Ground situations.

The Air Unit incorporates a micro-HDMI input and includes an adapter cable suitable for a GoPro with HDMI output (cables for other cameras available separately). On the Ground Unit, there is a standard HDMI output for connecting FPV goggles, a field monitor, or other monitoring or recording device. For applications where several users require their own video feed, up to four ground receivers (available separately) can be linked with one Air Unit.

Plug & Fly

CONNEX Mini is designed to set up and get you working out of the box – no complicated binding procedures here

Full HD Resolution

Unlike analogue systems, which limit you to SD resolution, the digital CONNEX Mini system provides support for up to 1080p60

Virtually No Latency

Featuring less than 1 ms of latency, the CONNEX Mini does not buffer or hold your video, so you can see and control what's happening live. Use CONNEX Mini video to help you fly, aim the camera, or operate the gimbal

5.8G ISM Band Operation

CONNEX Mini uses the 5.1 to 5.8 GHz frequency range to avoid interfering with aircraft control systems, which are usually 2.4 GHz. Automatic Frequency Selection (AFS) will choose the best available channel to be used and move seamlessly to an alternative channel on-the-fly if needed

Gimbal Control

CONNEX Mini is able to relay the control signal for an S.Bus- or PPM-controllable gimbal mounted on the UAV. A dedicated transmitter for the gimbal can then be connected to the via the Ground Unit's its 2.5mm transmitter port. PPM and Futaba (S.Bus) trainer port adapter cables are provided

OSD (On-Screen Display) Overlay

CONNEX Mini On-Screen-Display (OSD) is a great way to see your flight status. The OSD shows both information about your wireless link status and telemetry from your UAV flight controller. It works with MAVLink- and CAN-Bus-based telemetry modules (available separately)

Encrypted Transmission

CONNEX Mini employs AES128 for the video encryption and RSA1024 for key exchange to help ensure no one unauthorized is able to intercept your video feed

Management Software for Mobile and Desktop

Access advanced setting and update the firmware. The CONNEX management software is available for Windows, OS X, and Android

In the box includes

Air Unit:

• JST 4-Pin to XT-60 Power Cable
• JST 8-Pin to CAN-Bus / S.Bus Telemetry Cable
• JST 8-Pin to MAVLink / S.Bus Telemetry Cable
• 2 x Stern Antenna with R/P SMA-35
• R/A Micro (GoPro Back facing) to L/A Micro (50 cm)
• Micro-USB to USB Type-A Female (OTG Cable)
• Micro-USB to USB Type-A Male
• Touch-Fastener / Tie Wraps for Mounting
• Antenna Clips

Ground Unit:

• DC to XT-60 Power Cable
• 2.5mm to PPM Cable (non-SBUS RCs)
• 2.5mm to Futaba Trainer Port Cable
• 3 x 2 dBi Antenna R/P
• Thin HDMI Cable (Type-A to Type-A)