Welcome to the Kayell Australia Website - Tel: 1 300 KAYELL (529 355)

Monday, December 18th, 2017 at 04:49am
  • SMALLHD 1703 P3 PRODUCTION MONITOR
    SMALLHD 1703 P3 PRODUCTION MONITOR
    SMALLHD 1703 P3 PRODUCTION MONITOR
    SMALLHD 1703 P3 PRODUCTION MONITOR
    SMALLHD 1703 P3 PRODUCTION MONITOR
  • SmallHD 1703 Wide Gamut P3 Production Monitor

    Product Code: 33.1.MON-1703P3
    Email to a Friend Print Page Website Quote Request

    The SmallHD 1703 Wide Gamut P3 Monitor ships with:

    • 1703 P3 Gamut Monitor
    • 90cm HDMI to HDMI cable
    • Please Note the 1703 P3 does not ship with table stand as shown in photo.

    $5,295.00

    This item is in stock, it will be shipped in accordance with our terms and conditions
    Add to Favourites

The new 1703 Wide Colour Gamut P3 Production Monitor is the world's most rugged 17" monitor with astounding colour accuracy. This monitor is perfectly engineered for production and post-production use. 

Pagebuilder OS

All SmallHD monitors whether On-Camera or Production are equipped with the powerful and easy to use Pagebuilder Operating System. 

Pagebuilder OS

Reference Grade Cinema Colour

Each 1703-P3 monitor comes pre-calibrated for DCI-P3 mastering, Covering 100% DCI-P3 with a Delta E average of 0.8. Easily install your own 3D LUT calibration with advanced colour management solutions like Light Illusion's, LightSpace CMS, or SpectraCal's CalMAN. Load any 3D LUT via SD card using SmallHD’s ColorFlow 3D LUT engine. 

Software that Eliminates Hardware

Pagebuilder OS enables you to send your video signal downstream via the Output Preview page. Any LUTs applied to the Output Preview page will also be mirrored downstream. Easily convert HDMI/SDI signals with Cross Conversion . 

HD Scopes with Pixel Accurate Data Analysis 

Display up to three, fully customisable Scopes on screen at a time. Utilise Colour Picker to show raw pixel values from the displayed video. 

 

Expose with Confidence

Exposure Assist supports both ARRI and Spectrum based false colour, with built in IRE guides for reference. Utilise 2x Zebra to warn you when reaching a brightness level of your choosing. This is great for matching exposure across shots and cameras. 


Dual View

Monitor two input sources simultaneously. You can apply LUT’s and tools to each source individually. Great for monitoring A/B cameras or pre and post LUT footage. You can also apply tools to each page individually. 

 

Custom Focus Assist and Peaking Tools

Focus assist creates a bright highlight on in-focus subject matter; highly recommended when focusing on the fly. Focus Peaking increases the image sharpness allowing more detailed focusing. Change your colour and intensity of your focus tools. 

Versatile Image Framing 

Select standard markers and safety areas that can be overlaid on the display as lines or matte overlays with custom opacity level and colours. Default aspect ratios include 4:3, 1.85, 2.39:1, 16:9 and Custom (user selectable). 

Physical Features:

  • Durability
  • Rugged milled aluminium housing
  • VESA mounting
  • 3/8” & 1/4” mounting points
  • Power options
  • V-Mount, Gold Mount, AC power
  • LEMO
  • Rapid Rail
  • Quickly attach wireless devices & accessories
  • Table to C-stand
Specifications:

Display

Panel Type IPS LCD
Size Diagonal 17
Resolution 1920x1080
Pixel Density (PPI) 133 ppi
Aspect Ratio 16:9
Active Area 16.52
Brightness 450 Nits
Contrast 1500:1
Colour Gamut 100% DCI-P3
Colour Depth True 10 bit
Viewing Angle 178 degrees Vertical and Horizontal
Backlight Type White LED
Adjustable Backlight Yes - 0 - 100 in 6 steps with 100-nit studio mode
Temperature Adaptive Colour No

Viewfinder (EVF)

Diopter Range  
Effective Viewing Distance  
Variable Field of View range
Height  
Width  
Depth  
Weight  
Construction Material  

Input Signal Types/Formats

3G-SDI YCC 4:2:2 @ 10bit: 1920x1080p60, 1920x1080p59.94, 1920x1080p50, 1080i60, 1080i59.94, 1080i50
HD-SDI YCC 4:2:2 @ 10bit: 1080p30, 1080p29.97, 1080p25, 1080p24, 1080p23.98, 1080psF30, 1080psF29.97, 1080psF25, 1080psF24, 1080psF23.98, 1080i60, 1080i59.94, 1080i50, 720p60, 720p59.94, 720p50, 720p30, 720p29.97, 720p25, 720p24, 720p23.98
SD-SDI YCC 4:2:2 @ 10bit: 480i29.97, 576i25
HDMI Supports YCC 4:2:2 @ 8 bits, 8/10/12 bit color in RGB & YCC 4:4:4: 1080p60, 1080p59.94, 1080p50, 1080p30, 1080p29.97 1080p25, 1080p24, 1080p23.98,1080i120, 1080i119.88, 1080i100, 1080i60, 1080i59.94, 1080i50, 720p120, 720p119.88, 720p100, 720p60, 720p59.94 , 720p50, 720p30, 720p29.97, 720p25, 720p24, 720p23.98, 480p120, 480p119.88, 480p100, 480p60, 480p59.94, 576p100, 576p50
Component Not Supported
Composite Not Supported
Audio HDMI & SDI - Monitor through Speakers in Front Bezel or Through Headphone Jack - Metering up to 8 channels

Output Signal Types/Formats

3G-SDI YCC 4:2:2 @ 10-bits: 1080p60, 1080p59.94, 1080p50, 1080i60, 1080i59.94, 1080i50
HD-SDI YCC 4:2:2 @ 10-bits: 1080p30, 1080p29.97, 1080p25, 1080p24, 1080p23.98, 1080psf30, 1080psf29.97, 1080psf25, 1080psf24, 1080psf23.98, 1080i60, 1080i59.94, 1080i50, 720p60, 720p59.94, 720p50, 720p30, 720p29.97, 720p25, 720p24, 720p23.98
SD-SDI YCC 4:2:2 @ 10-bits: 480i29.97, 576i25
HDMI YCC 4:2:2 @ 8 bits, 8/10/12 bit color in RGB & YCC 4:4:4: 1080p60, 1080p59.94, 1080p50, 1080p30, 1080p29.97 1080p25, 1080p24, 1080p23.98,1080i60, 1080i59.94, 1080i50, 1080i30, 1080i29.97, 1080i25, 720p120, 720p119.88, 720p100, 720p60, 720p59.94 , 720p50, 720p30, 720p29.97, 720p25, 720p24, 720p23.98, 480p120, 480p119.88, 480p60, 480p59.94, 576p100, 576p50, 480i240, 480i239.76, 480i120, 480i119.88, 480i60, 480i59.94, 480i30, 480i29.97, 480i24, 480i23.98, 576i200, 576i100, 576i50, 576i25
Component Not Supported
Composite Not Supported
Audio HDMI & SDI - Incoming Audio Stream is sent downstream via HDMI or SDI connection

Connector Type

SDI 2x 3G Inputs (BNC), 2x 3G Outputs (BNC)
HDMI 1x Input, 1x Output
Component Not Supported
Composite Not Supported
Audio 1x â…›” Headphone Jack on Front of Monitor
Power In 1x AC Power Input - 3 Prong 90-260V, 1x XLR 4-pin Input 12-34VDC, 1x Lemo Output 12VDC @ 4A Max
Power Out 1x XLR 4­pin Input 12­-34VDC, 1x Lemo Output 12VDC @ 4A Max
USB 1x Front USB2, 2x Rear USB2

Controls

Primary Control Interface Joystick Navigation, Dedicated Back Button. Additional Dedicated buttons for: LUT Selection; Backlight Level; Input Switch; Settings Menu; Multi View; Page 1-4 Instant Selection; Tools Menu
Record/Capture Dedicated Capture Button on Front Bezel
User Defined Functions  
RF Wireless Remote / External Control  
USB Remote / External Control  

Data I/O

Storage SD Card for LUTs, Captured Images, Image Overlays, Firmware Upgrades, Profile Saving.
USB USB ports support storage devices for LUTs, Captured Images, Image Overlays, Profile Saving.
Wireless  
Wifi  

Power

Connector Type Single XLR 4-pin 12-34V DC IN for Battery or Power Supply, 12V Lemo 2-pin OUT MAX 2A
Voltage AC: 100 - 240 VAC 50-60Hz DC: 12 - 34 VDC
Power Consumption 28W Typ
Battery Plate Included Optional V-Mount, Gold-Mount
Recommended Power Supply Included
Overload Protection Yes
Smart Battery Compliant  
Battery Types Gold-Mount, V-Mount with optional Battery Plate Accessory
Battery Chemistry  
Output Voltage (VDC) 12V @ 2A via 2-pin Locking LEMO Connector
Battery Capacity (mAh)  
Battery Charging Time (hours)  

Environmental

Compliance FCC, IC, CE, RoHS
Operating Temperature 32F - 100F
Storage Temperature 0F - 104F
Screen Protection Optional Acrylic Screen Protector
Height 11.7" (29.72cm)
Width 17" (43.18cm)
Depth/Length 2.5" (6.35cm)
Weight (Item Only without battery) 12.0625lb (5.47kg)
Weight (Packaged) 16.86lb (7.65kg)
Mount Points Multiple ¼”-20 & â…œ”-16 Threads on Top, Bottom, Left & Right Sides. Cold Shoe Style Rails on Back of Monitor. Available Cheeseplate for Battery Bracket Mounting. Available Rapid Rail Mount interfaces with cold shoe slots for 2 additional ¼”-20 threads.
Note:  

Software

Pixel Zoom (type) 2x & 4x Zoom with smooth pan via joystick
Frame Guides Yes: Preset Aspect Ratios & Customizable
DSLR Scale Canon 5DMkii & Canon 7D
Custom Scale Yes (Underscan Only)
Anamorphic De-Squeeze Yes: 1.33x, 1.5x, 1.66x, 2.0x
Image Rotate(Manual/Automatic) Yes - Automatic or Manual Control
Image Flip (Manual/Automatic) Yes - Automatic or Manual Control
Cross Conversion Yes: HDMI → SDI & SDI → HDMI
Focus Assist (Colours) Yes - User Adjustable Colour Style and Intensity
Peaking Yes - User Adjustable Intensity
False Colour Yes - Rainbow & Arri Style
Zebra Yes - Dual - User Configurable
Waveform Yes - Luma & RGB Style, Fully User Customisable w/ Region of Interest Highlighting
Vectorscope Yes
PIP  
RGB Parade Yes - Fully User Customisable
Histogram Yes - Luma & RGB Style
Horizon Indicator  
Image Capture Yes - With Dedicated Button
Dailies Recording/Playback  
Master Recording  
Wifi Streaming  
Custom LUTS Yes - Loadable as Looks on Pages or as Systemwide Colour Calibration via the settings menu
LUT Creation  
LUT Downstream Yes - Available on SDI 1 or HDMI Out. Applied on Output Preview Page.
LUT Import via SD Card or USB Storage Device
Onion Skinning  
Image Overlay Yes with Opacity Slider and Blink Setting
Blue Only  
Firmware Compatible with 1300-1700-2400-3200 Firmware V1.4 and later
Audio Meters Yes ­ HDMI & SDI up to 8 channel