Zhiyun-Tech Weebill-S Image Transmission Pro Package
Essential Add-On's we recommend
The WEEBILL-S Image Transmission Pro Package from Zhiyun-Tech includes the WEEBILL-S gimbal with everything it normally comes with, plus a wireless video transmitter, a lens motor, a smartphone holder, and HDMI cables for your image transmission workflow.
The wireless video transmitter is very compact and attaches under the camera on the gimbal. It connects to the camera using included cables. It pairs with the gimbal and camera and allows you to wirelessly transmit video to up to three TransMount receivers, sold separately. It accepts up to a 1080p60 resolution signal and sends 1080p30 up to 328' to the receivers over Wi-Fi. Using the included USB camera control cables, the transmitter is capable of pairing with select Canon, Nikon, Panasonic, and Sony cameras.
The TransMount Max lens motor has the torque to control focus or zoom and can be lined up to either lens gear interchangeably. It can be operated using the gimbal handwheel or the companion iOS/Android app. The TransMount Phone Holder mounts on the side of the gimbal and gives you convenient access to the companion app. It holds phones up to 6.3" wide (when the phone is held in landscape orientation), and it can be articulated forward/backward as well as folded when not in use.
NOTE: The WEEBILL-S doesn't support many 3rd-party 18650 batteries because it requires the slightly shorter kind made by Zhiyun-Tech, so only Zhiyun-Tech 18650 batteries are recommended.
Zhiyun-Tech WEEBILL-S Handheld Gimbal Stabilizer
The Zhiyun-Tech WEEBILL-S incorporates the underslung mode design of its predecessor, the WEEBILL LAB, and also has a more compact form as well as other new features. The sling mode design consists of a handle on the rear that allows for easy switching to underslung mode as well as better handling in all other modes. Other improvements include upgraded motors and stabilization algorithm. The WEEBILL-S features 300% more motor torque and 50% more responsiveness. This allows you to better balance camera/lens combos such as the Canon 5D Mark IV with a 24-70mm zoom lens.
Being released along with the WEEBILL-S as an optional accessory is the TransMount Image Transmission Module, a compact device designed to neatly mount under the quick release plate of the WEEBILL-S and allow wireless streaming of up to 1080p30 resolution over distances up to 328'. Up to three devices, including phones, tablets, and select professional monitors, can be synced up using corresponding receiver modules.
The companion Zhiyun-Tech ZY Play app, compatible with iOS and Android, has been upgraded to work with the Image Transmission Module to allow more efficient control of the gimbal. A feature in the app called SmartFollow 2.0 works with the module to allow precision object tracking directly from the app. A tool called Sync Motion enables real-time monitoring and synchronous motion control. There are also upgrades to standard features, including ViaTouch 2.0, which allows you to control various functions and settings of your camera and gimbal directly from your smartphone screen. These include zoom and focus, where supported, as well as follow speed, ISO, aperture, and more. Other features you'll find in the ZY Play app include creative capture tools such as Panorama, Timelapse, Motionlapse, and Long Exposure Timelapse, among others.
The WEEBILL-S offers six modes of operation. These include Full-Range POV Mode, which allows 360° synchronous movement on all three axes, and Vortex Mode, which lets you achieve 360° barrel shots. Please see the Features section below for a description of all six modes. Other features of the gimbal include Intelligent Auto-Tune, which automatically recognizes the weight of your camera and adapts to the weight to provide the best power efficiency possible. The battery operating time of the WEEBILL-S has also been increased to up to 14 hours.
The WEEBILL-S allows electronic focus control with supporting cameras. This is done using the integrated handwheel. Please see the Zhiyun-Tech website for an up-to-date list of supported cameras. The gimbal also supports mechanical focus and zoom control using optional motors. The WEEBILL-S supports the TransMount motors as well as all the other TransMount accessories that the predecessor model was compatible with. Among these is the Quick Setup Adapter Set that has become very popular since its release.
The WEEBILL-S comes with multiple accessories, including an Arca Swiss/Manfrotto dual-layer quick release plate and a storage case. Also included is a mini tripod that can be used as a stand or an extension handle. The mini tripod is also what completes the gimbal for underslung, low-mode operation. It attaches to the rear handle to function as an overhead handle.
TransMount Image Transmission Module
Upgraded ZY Play App
6 Modes of Operation
Full-Range POV Mode
Zhiyun-Tech Transmount HDMI Wireless Video Transmitter for WEEBILL-S/CRANE 3S/2S
With the Transmount HDMI Wireless Video Transmitter, you can transmit high-definition, low-latency 1080p30 video to a Transmount receiver up to 328' line of sight. The transmitter is compatible with the WEEBILL-S, CRANE 3S, or CRANE 2S stabilizer, allowing camera control through the stabilizer while wirelessly transmitting your video. The transmitter is capable of transmitting video to up to three devices.
The Transmount transmitter features an HDMI type A input which supports up to 1080p60 video, and it transmits up to 1080p30 over Wi-Fi. Power is provided by the integrated 1400mAh battery, which is charged using the micro-USB input/output port and lasts approximately 1.5 hours on a full charge. The micro-USB port also acts as a camera control port for various camera types, and a Sony-specific camera control port provides camera control for Sony cameras. Micro-USB, mini-USB, USB Type-B, and USB Type-C camera control cables are included with the transmitter.
The transmitter unit can be secured to a mount or stand via the included mounting plate and four M2.5 screws.
- Nikon D850
- Canon 5D Mark IV, 6D Mark II, EOS R
- Panasonic GH5
- Nikon Z6
- Sony a7R III
Zhiyun CRANE 3S gimbal stabilizer
Zhiyun CRANE 2S gimbal stabilizer
- 328' maximum transmission range
- HDMI input up to 1080p60
- Transmit to up to three receivers
- 60 ms low latency
- Video transmission up to 1080p30
- Wi-Fi wireless transmission protocol
- Micro-USB charging and control port
- Sony camera control port
- USB camera control cables included
- Mounting plate with M2.5 screws
Zhiyun-Tech TransMount Max Servo Zoom/Focus Controller for CRANE 3 LAB/2S, WEEBILL-S/LAB
The Zhiyun-Tech TransMount Max Servo Zoom/Focus Controller can be used interchangeably for zoom and focus control on the CRANE 3 LAB, CRANE 2S, WEEBILL-S, and WEEBILL LAB gimbals. It has a powerful-enough motor to control zoom, whereas the lighter-weight TransMount Lite is designed for focus control only.
The CRANE 3 LAB and CRANE 2S support up to two motors at the same time, and it's recommended to use the TransMount Max and TransMount Lite together if requiring both zoom and focus control on the CRANE. The WEEBILL-S and WEEBIL LAB, however, support only one motor, so the TransMount Max is recommended as the only solution because it can be used interchangeably for both functions.
Featuring a toolless design, the TransMount Max attaches on the gimbal using just the included thumbscrews. It can be controlled via the gimbal handwheel or the companion smartphone app. Secure it to the supplied support bracket and mounting rod using two thumbscrews, and attach this assembly to the bottom of the gimbal's baseplate with the third thumbscrew. Then, connect the servo to the gimbal with the provided USB cable, and connect the camera to the gimbal with one of the camera control cables the gimbal comes with. The USB cable connection provides zero-latency signal transmission.
- Can be used interchangeably for zoom and focus control
- Recommended as the zoom solution for the CRANE 3 LAB and CRANE 2S, which support two motors at the same time, and as the sole solution for the WEEBIL-S and WEEBILL LAB, which support only one motor
- Toolless design—assembles with the included support bracket and mounting rod and attaches to the bottom of the gimbal's baseplate using supplied thumbscrews
- Connects to the gimbal via a USB cable and controls focus with zero latency
Zhiyun-Tech TransMount Phone Holder with Crown Gear for CRANE 3 LAB, CRANE 3S/SE, WEEBILL-S & WEEBILL LAB
The TransMount Phone Holder with Crown Gear is compatible with the CRANE 3 LAB, CRANE 3S/SE, WEEBILL-S, and WEEBILL LAB handheld gimbal stabilizers. It secures on the side of the gimbal and is adjustable to hold phones up to 6.3" wide when the phone is held in landscape orientation. It also articulates forward/backward and can be folded up when not in use.
- Zhiyun-Tech WEEBILL-S Handheld Gimbal Stabilizer
- 2 x 18650 Lithium-Ion Battery
- Quick Release Plate Assembly
- USB Type-C Cable
- Micro-USB to Micro-USB Cable
- Micro-USB to Mini-USB Cable
- Micro-USB to USB Type-C Cable
- Sony Camera Control Cable
- Mini Tripod
- Backing Base
- Cable Case
- Storage Case
- Zhiyun-Tech Transmount HDMI Wireless Video Transmitter for WEEBILL-S/CRANE 3S/2S
- Mounting Plate
- Micro-USB Camera Control Cable
- Mini-USB Camera Control Cable
- USB Type-C Camera Control Cable
- Multi-USB Camera Control Cable
- Micro-USB to USB Type-A Charging Cable
- 4 x M2.5 Screw
- Allen Wrench
- Zhiyun-Tech TransMount Max Servo Zoom/Focus Controller for CRANE 3 LAB/2S, WEEBILL-S/LAB
- Large Lens Gear Ring
- Small Lens Gear Ring
- USB Cable
- Support Bracket
- Mounting Rod
- 3 x Thumbscrew
- Zhiyun-Tech TransMount Phone Holder with Crown Gear for CRANE 3 LAB, CRANE 3S/SE, WEEBILL-S & WEEBILL LAB
- Mini-HDMI to Micro-HDMI Cable
- Mini-HDMI to Mini-HDMI Cable
- Mini-HDMI to HDMI Cable