Welcome to the Kayell Australia Website - Tel: 1 300 KAYELL (529 355)

Thursday, March 21st, 2019 at 04:59am
  • Wooden Camera Director's Monitor Cage v2 with FREE Core SWX HyperCore Battery

    Product Code: 54.239000-HC7
    Email to a Friend Print Page Website Quote Request


    • Blackmagic Video Assist
    • SmallHD DP4, DP6, AC7, DP7, 503, 703
    • TVLogic VFM-056W/WP, VFM-058W
    • Ikan D5, VK7i, VH8, VL5, VX9e
    • Odyssey 7, 7Q
    • Atomos Samurai, Ninja, Shogun
    • And many more


    This item is in stock, it will be shipped in accordance with our terms and conditions
    Add to Favourites

Strictly while stocks last this Directors cage now comes with FREE Core SWX HyperCore Slim 7 Battery valued at $330! 

Please Note: The Wooden Camera Cage does not ship with a V-Mount Battery Plate and one is required for using the battery with this cage. We recommend the Wooden Camera Dual P-Tap V-Mount Plate 54.191300

The Director's Monitor Cage v2 is engineered to be universally compatible with any monitor up to 9 inches (measured diagonally) and attaches via top, bottom, or rear 1/4-20 mounting locations. Newly designed main brackets also allow direct mounting to the rear of Convergent Design Odyssey and Apollo.

The DMCv2 arrives mostly pre-assembled, with simplified, rod-based height adjustment. Ergonomic wooden hand grips can be quickly positioned via the built-in 15mm clamps. The battery mounting plate features V-Mount and Gold Mount attachment points as well as swing away functionality for easy access to the rear of the monitor and installed wireless devices. The cage includes a built in baby pin clamp with locking thumbwheel for stand mounting.

The included sun shade is adaptable to most monitors and snaps directly to the cage frame. The bottom of the shade is made of velcro, which can be adjusted to the proper width of the monitor and an included loop piece can be used to hook onto the bottom of the cage for a more permanent mounting of the shade.

The tool-less design of the handles allow them to be folded in for easy packing and the sun shade can be repurposed to act as a protective cover. Also included is a padded neck strap with 4 mounting points, a Teradek mounting bracket that offers easy attachment for wireless receivers with lower #4-40 or 1/4-20 mounting points, and a cable tie for cable management.

Vertical and side-by-side mounting of two monitors is also possible with the Dual Director's Monitor Cage v2!

For powering LCD and wireless receiver, consider the WC V-Mount (Dual D-Tap) or WC Gold Mount (Dual D-Tap). 


  • (6) 1/4-20 x 1/2" button head screws
  • (6) 1/4-20 x 3/8" button head screws
  • (2) Offset adapters
  • (4) M3 x 8mm philips screws (for V-Mount plate)
  • (4) M3 x 12mm philips screws (for Gold Mount plate)
  • (1) M2.5 x 4mm socket cap screw (for Odyssey 7Q location pin)
  • (1) Teradek Mounting Bracket
  • (1) 1/4-20 x 1 1/4" button head screw and 1/4-20 nut (for Teradek Bolt)
  • (4) #4-40 x 1/2" socket cap screws ( for Teradek receiver)
  • (4) M3 x 20mm socket cap screws (for Odyssey 7Q)
  • (1) WC Cable Tie
  • (1) Sun Shade
  • (1) Sun Shade (velcro loop for Odyssey)


  • Weight: 1179.34g
  • Dimensions: 279.4 x 177.8 x 101.6 mm

Director’s Monitor Cage Instructions and Monitor Installation Guide